Hoshizaki MWH KML-351MAH Manual Do Utilizador

25

1) Remove the shipping carton, tape, and packing material.
2) Check that the refrigerant lines do not rub or touch lines or other surfaces, and that the 

fan blade moves freely.

1) Assemble 2 sets of legs using the legs, bolts, and nuts provided. See Fig. 11. 
2) Position 1 of the plates provided between a set of legs and the remote condenser unit, 

then secure the legs to the remote condenser unit with the bolts and nuts provided. 
Repeat on the other side with the remaining set of legs.

3) The bottom of each leg has a mounting hole. Secure the legs to the permanent site with 

4 bolts (not included).

Bolt with Split Lock 

Washer and Flat Washer

Nut

Plate

Leg

Bolt with Split Lock 

Washer and Flat Washer

Nut

The icemaker, line set, and remote condenser unit must contain the same type 
of refrigerant. Mixing of refrigerants will result in improper operation and possible 
damage to the refrigeration system.

KML-631MRH

URC-9F

3/8" 
OD

1/2" OD

Not 
Applicable

3/8" 
OD

1/2" OD

Add 0.4 oz. for each 
foot over 66 feet 
(40 g for each meter 
over 20 m). Write 
new total charge on 
icemaker's rating 
label.