Philips WP3810 Manual Do Utilizador

the filtered water flow will be extremely low or the water purifier

will get damaged.
installation a-type adapter

For taps with a round spout with a diameter of 16mm, 17.5mm or

19mm (Fig. 2).

Remove the attachment nut and the adapter from the water

purifier housing (Fig. 3).

Pass the attachment nut over the tap spout (Fig. 4).

Place the matching adapter (A-type) over the tip of the spout. The

16mm adapter is packed with the water purifier. Replace it with

the 17.5mm adapter or 19mm adapter to fit the diameter of your

tap (Fig. 5).

Screw the attachment nut firmly onto the water purifier

housing (Fig. 6).
installation B-type adapter

For taps with an aerator (threaded on the outside) (Fig. 7).

Remove the attachment nut and the adapter from the water

purifier (Fig. 8).

Remove the aerator cap from the tap and pass the attachment nut

over the spout. Take out the original adapter and screw the

matching adapter (B-type) onto the tap (Fig. 9).

Tighten the adapter further with a coin (Fig. 10).

Firmly screw the attachment nut onto the water purifier

housing (Fig. 11).
installation C-type adapter

For taps with an aerator (threaded on the inside) (Fig. 12).

Remove the attachment nut and the adapter from the water

purifier housing (Fig. 13).

English