Справочник Пользователя для Philips WP3810
the filtered water flow will be extremely low or the water purifier
will get damaged.
installation a-type adapter
installation a-type adapter
For taps with a round spout with a diameter of 16mm, 17.5mm or
19mm (Fig. 2).
1
Remove the attachment nut and the adapter from the water
purifier housing (Fig. 3).
Pass the attachment nut over the tap spout (Fig. 4).
Place the matching adapter (A-type) over the tip of the spout. The
16mm adapter is packed with the water purifier. Replace it with
the 17.5mm adapter or 19mm adapter to fit the diameter of your
tap (Fig. 5).
Screw the attachment nut firmly onto the water purifier
housing (Fig. 6).
installation B-type adapter
installation B-type adapter
For taps with an aerator (threaded on the outside) (Fig. 7).
1
Remove the attachment nut and the adapter from the water
purifier (Fig. 8).
Remove the aerator cap from the tap and pass the attachment nut
over the spout. Take out the original adapter and screw the
matching adapter (B-type) onto the tap (Fig. 9).
Tighten the adapter further with a coin (Fig. 10).
Firmly screw the attachment nut onto the water purifier
housing (Fig. 11).
installation C-type adapter
installation C-type adapter
For taps with an aerator (threaded on the inside) (Fig. 12).
1
Remove the attachment nut and the adapter from the water
purifier housing (Fig. 13).
-
-
-
English
9