Emerson Process Management 3-9000-522 Manual Do Utilizador

E-14

 UPGRADE 2350A GC S/W AND 2350 EPROMS

MON2000

Set-Up and Programming

JULY 2010

3. Return and secure the Card Cage Assembly 

its original position in the chassis mounting. 

Tighten the four screws.

4. Return and secure the field wiring TB in its 

original position. Tighten the six screws.

5. Reconnect the AC power cord to J21 on the 

TB, and restore AC power to the 2350A GC 

Controller.

The purpose of this procedure is to define the 

CMOS table set-up and programming 

requirements for the CPU assembly and 

DiskOnChip.

1. Install the blank DiskOnChip into socket 

U1 on the CPU assembly, noting the 

orientation of pin 1.

2. Plug the floppy drive cable into J10 on the 

CPU assembly and plug the board into the 

card cage.

3. Plug the keyboard cable into J1 on the CPU 

assembly.

4. Turn on the power. When the video displays 

on the monitor, press the 

DELETE

 button to 

access the CMOS setup window. 
(a) The Standard CMOS Setup window 

displays. Press the 

ENTER

 button.

(b) Set time and date by either 

PAGE UP, 

PAGE DOWN

, or by entering the 

appropriate number value. After making 

the desired change, press 

ENTER.