Emerson 510 Manual Do Utilizador
Surge Protective Devices
Installation, Operation and Maintenance Manual
2
IO-70103 Rev 0, 1/2013
UNPACKING AND INSTALLATION
Unpacking and Preliminary Inspection
1. Inspect the shipping crate(s) for damage or
signs of mishandling before unpacking the unit.
2. Remove any securing bands and cardboard packing
and inspect the unit for any obvious shipping damages.
3. If any damage as a result of shipping is observed,
immediately file a claim with the shipping agency and
forward a copy to your local Emerson Network Power
Surge Protection Sales Representative.
forward a copy to your local Emerson Network Power
Surge Protection Sales Representative.
Handling Considerations
Larger units are bolted to a shipping pallet to facilitate
handling by forklift or pallet jack. Check the size and
weight. Refer to the cabinet data furnished with the unit.
handling by forklift or pallet jack. Check the size and
weight. Refer to the cabinet data furnished with the unit.
Storage
The unit should be stored in a clean, dry
environment. Storage temperature range is -55ºC (-67ºF)
to +85ºC (+185ºF). Care should be taken to avoid
condensation. All packing and shipping materials should
be left intact until the unit is ready for final installation. If
the unit has been stored for an extended period of time, the
unit should be cleaned and carefully inspected before
placing into service.
environment. Storage temperature range is -55ºC (-67ºF)
to +85ºC (+185ºF). Care should be taken to avoid
condensation. All packing and shipping materials should
be left intact until the unit is ready for final installation. If
the unit has been stored for an extended period of time, the
unit should be cleaned and carefully inspected before
placing into service.
LOCATION CONSIDERATIONS
For optimum transient surge protection, coordinated surge
suppression should be applied at the service entrance and
all other electrical connections to the building (telephone,
CATV, etc.), at known surge generating loads within the
building (large motors, arc welders, switched capacitors,
etc.), as well as at sensitive electronic loads (such as
computers, electronic appliances, solid state motor drives,
etc.). For interconnected electronic loads (such as by way of
data cabling), transient surge suppression should also be
applied to the interconnecting wiring (data cables).
suppression should be applied at the service entrance and
all other electrical connections to the building (telephone,
CATV, etc.), at known surge generating loads within the
building (large motors, arc welders, switched capacitors,
etc.), as well as at sensitive electronic loads (such as
computers, electronic appliances, solid state motor drives,
etc.). For interconnected electronic loads (such as by way of
data cabling), transient surge suppression should also be
applied to the interconnecting wiring (data cables).
Environment
Unit is designed for operation indoors in
ambient temperatures of -40ºC (-40ºF) to +60ºC (+140ºF)
with a relative humidity of 0% to 95% (non-condensing).
with a relative humidity of 0% to 95% (non-condensing).
The unit is provided in an industrial use enclosure, which is
dust-tight and drip-tight and should not be installed in areas
with excessive dust, corrosive vapors, flammable materials
or explosive atmospheres.
dust-tight and drip-tight and should not be installed in areas
with excessive dust, corrosive vapors, flammable materials
or explosive atmospheres.
Audible Noise
The audible noise of the unit is less
than 40 dB at 5 feet, which allows its placement within
almost any room if desired.
almost any room if desired.
Service Clearances
Service clearance is needed for units
with hinged doors on the front that are capable of being
opened. Thirty-six inches (36 in/914 mm) minimum is
recommended.
opened. Thirty-six inches (36 in/914 mm) minimum is
recommended.
Mounting
Unit is intended to be wall mounted. Refer to
installation instructions for mounting dimensions and weight.
Warnings Defined
Danger: Indicates an imminently
hazardous situation that, if not
avoided, will result in death or
serious injury. This signal
word is to be limited to the
most extreme situations.
hazardous situation that, if not
avoided, will result in death or
serious injury. This signal
word is to be limited to the
most extreme situations.
Warning: Indicates a potentially
hazardous situation that, if not
avoided, could result in death or
serious injury.
hazardous situation that, if not
avoided, could result in death or
serious injury.
Caution: Indicates a potentially
hazardous situation that, if not
avoided, may result in minor or
moderate injury. It may also be
used to alert against unsafe
practices.
hazardous situation that, if not
avoided, may result in minor or
moderate injury. It may also be
used to alert against unsafe
practices.