Lucent Technologies Release 8.2 Manual Do Utilizador
IP Trunk Administration
425
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000
CID: 77730
F
IP Trunk Installation and
Administration
Backing up configuration manager
Lucent recommends you perform a backup to the Personal Computer Memory Card
International Association (PCMCIA) flash disk whenever you make a change in the
configuration manager. Keep the flash disk in a safe place so you can use the backup
information if your MAPD circuit pack fails or if you want to restore to a previous
known state.
International Association (PCMCIA) flash disk whenever you make a change in the
configuration manager. Keep the flash disk in a safe place so you can use the backup
information if your MAPD circuit pack fails or if you want to restore to a previous
known state.
Before you begin
Be sure your backup PCMCIA flash disk is inserted in the MAPD circuit pack.
Instructions
To perform a backup, begin at the Windows NT desktop:
1
Double-click the
IP Trunk Backup Restore
icon.
The IP Trunk Backup/Restore Utility screen appears.
2
In the IP Trunk Backup/Restore Utility dialog screen, click
Files
,
Backup
.
The IP trunk Backup screen appears.
3
In the IP Trunk Backup screen, click on the
BACKUP
button.
4
Remove the flash disk and store in a safe place.
Restoring IP trunk
Before you start
1
Remove the defective MAPD circuit pack from the switch.
2
Install the replacement MAPD circuit pack in the switch.
3
Insert the backup PCMCIA flash disk into the MAPD circuit pack.
Instructions
To perform a restore, begin at the Windows NT desktop:
1
Double-click the
IP Trunk Backup Restore
icon.
The IP Trunk Backup/Restore Utility screen appears.
2
In the IP Trunk Backup/Restore Utility dialog screen, click
Files
,
Restore
.
The IP trunk Backup screen appears.
3
In the IP Trunk Backup screen, click on the
RESTORE
button.