GarrettCom MNS-6K-SECURE 14.1.4 Manual Do Utilizador

U P D A T I N G     S O F T W A R E   –   S T E P   2  

 

164 – Status window for Xmodem (using HyperTerminal under Windows XP) 

 

When the file transfer is completed, the window shown in Figure 10 exits and the 
completion message is displayed as shown in Figure 11. 

 

Magnum6K25# 

165 – Message which shows the completion of the file transfer (from ‘saveconf’ command) 

Prerequisites – PC (or workstation/computer) with telnet software and a PC (or 
workstation/computer) with FTP or TFTP server software. For simplicity, the two PC’s (or 
workstations/computers) can be one and the same.   

To save using TFTP or FTP first ensure that you have the FTP or TFTP server set up and 
the switch can ‘ping’ the TFTP or the FTP server. For ftp services, make sure the server can 
support anonymous login or make sure the login password information is available. 

For saving the configuration, use the same saveconf command listed above. In the example 
below, assume the IP address of the TFTP or FTP server is 192.168.10.99 and is connected 
to the switch with proper network connectivity (i.e. the switch can ping the TFTP or FTP 
server as well.)  

Example using TFTP 

Do you wish to upload the configuration? [ 'Y' or 'N'] 

Y 

166 – Example of saveconf command for tftp 

346