3com 4210 Manual Do Utilizador

242

HAPTER

26: XRN C

ONFIGURATION

UIDE

# Configure the fabric name as hello.

[3Com] sysname hello

# Configure the authentication mode as simple and password as welcome.

[hello] XRN-fabric authentication-mode simple welcome

2 Configure Switch B.

# Bring up the fabric ports.

<3Com> system-view

[3Com] fabric-port GigabitEthernet 1/1/1 enable

[3Com] fabric-port GigabitEthernet 1/1/2 enable

# Configure the unit ID as 2.

[3Com] change self-unit to 2

# Configure the unit name as Unit2.

[3Com] set unit 2 name Unit2

# Configure the fabric name as hello.

[3Com] sysname hello

# Configure the authentication mode as simple and password as welcome.

[hello] XRN-fabric authentication-mode simple welcome

Perform the same configurations on Switch C.

3 After the above configuration, use the display ftm information command to

view the running status of the XRN fabric.

[hello] display ftm information

FTM State

: HB STATE

Unit ID

: 1 (FTM-Master)

Fabric Type

: Ring

Fabric Auth

: Simple

Fabric Vlan ID

: 4093

Left Port

: Normal

Right Port

: Normal

Advertise

: Send = 5, Receive = 3

Advertise ACK

: Send = 0, Receive = 5

Heart Beat

: Send = 20, Receive = 0

Left Port

: Index = 255, IsEdge = 0

Right Port

: Index = 25, IsEdge = 0

Units Num Left

: 1

Units Num Right : 3

Units Num Backup: 2