3com 4210 Manual Do Utilizador

By viewing the Left Port and Right Port fields in the output information, you can 
know the running status of the current fabric ports. The above prompt 
information indicates that the fabric ports are working normally (displayed as 
Normal).

You can also use the display XRN command to view the switches in the current 
XRN fabric.

[hello] display XRN-fabric

Fabric name is hello, system mode is L3.

Unit Name

Unit ID

unit1

1(*)

unit2

2

unit3

3 

You can see from the above output information that the three switches have been 
successfully added to the XRN fabric, and your configurations have been finished.

1 Configure Switch A

# Bring up the fabric ports.

<3Com> system-view

[3Com] fabric-port Cascade 1/2/1 enable

[3Com] fabric-port Cascade 1/2/2 enable 

# Configure the unit ID as 1.

[3Com] change self-unit to 1 

# Configure the unit name as Unit1.

[3Com] set unit 1 name Unit1 

# Configure the fabric name as hello.

[3Com] sysname hello 

2 Configure Switch B.

# Bring up the fabric ports.

<3Com> system-view

[3Com] fabric-port Cascade 1/2/1 enable

[3Com] fabric-port Cascade 1/2/2 enable 

# Configure the unit ID as 2.

[3Com] change self-unit to 2 

# Configure the unit name as Unit2.

[3Com] set unit 2 name Unit2 

# Configure the fabric name as hello.