Tektronix 2200 Manual Do Utilizador

2-17

8. Place the pair of new black cables over the proper studs in the Primary 

and Redundant Power Supplies, routing the cables through the slot in 
the bottom of the Primary supply and the top of the Redundant supply. 
(The colors must match those of the existing cables.)

Black Cables 
from Switcher

Black Cables 
from Primary
Power Supply

Lock Washers

Studs

Lock
Washers

Hex 
Nuts

Route Cables
Down Through
Slot in Top of
Lower Chassis

Red Cables 
from Primary
Power Supply

Hex Nuts

Lock Washers

Tighten Captive
Screws to Upper
Chassis
(8 Places)

NOTE:
Always Insert Black Cables
In Slots Before Red Cables

If Present,
Remove 
Connector 
Cover Plate
From Primary 
Power Supply

If Present,
Remove Slot 
Cover Plate
From Primary 
Power Supply

Connector Cover Plate 
Should Remain on Bottom of 
Redundant Power Supply

Slot Cover Plate Should Remain on
Bottom of Redundant Power Supply

Primary 
Power Supply

Redundant
Power Supply

Switcher
Frame

Red Cables 
from Switcher