IBM 8260 Manual Do Utilizador

8260A>
8260A> show module 8.2 verbose

Slot

Module

Version Network

General Information

----- --------------- ------- ------------- -------------------
08.02 T-MAC

v2.00

TOKEN_RING_7

T-MAC: Token Ring Network Monitor Card

Boot Version:

v2.00

IP Address:

9.67.46.195

Subnetwork Mask:

ff.ff.ff.f0

Default Gateway:

0.0.0.0

Station Address:

10-00-f1-0b-58-00

Locally Administered Address:

00-00-00-00-00-00

MAC Address Type:

BURNED-IN

Interface Mode:

ENABLED

RMON Groups:

ENABLED

Surrogate Groups:

DISABLED

Dot5 Group:

DISABLED

RMON Host Statistics Collection:

ENABLED

RMON MAC Layer Statistics Collection:

ENABLED

RMON Promiscuous Statistics Collection: ENABLED
RMON Ring Station Statistics Collection: ENABLED

RMON Source Routing Statistics Collection: ENABLED
Monitor Contention:

DISABLED

Adapter Status:

OPENED

Adapter Microcode Version:

00 00 01 c1 e3 f1 f7 c3 f1 40

Early Token Release:

DISABLED

Internal Wrap:

DISABLED

External Wrap:

DISABLED

Interface Number:

6

8260A>

Figure 132. Show M o d u l e C o m m a n d for T-MAC

As can be seen, at the time of display, all the RMON groups are enabled on
the T-MAC.

 6. Once the T-MAC is enabled to collect the appropriate RMON group, you can

display the collected information using the following command:

SHOW COUNTER RMON {rmon group} {network}

This command is described in 10.6.5, “SHOW COUNTER Command for
Token-Ring Networks” on page 222.

The token-ring architecture defines the Configuration Report Server (CRS) and
Ring Error Monitor (REM) functions.

The Ring Error Monitor (REM) observes, collects, and analyzes hard-errors and
soft-error reports sent by the ring stations on a single ring and assists in fault
isolation and correction. Configuration Report Server (CRS) function accepts
commands from the LAN manager to get station information, set station

8260 Multiprotocol Intelligent Switching Hub