IBM 8260 Manual Do Utilizador

8260A> show tr_surrogate 8.2 surr_status

Surrogate Status Data for Network TOKEN_RING_7
------------------------------------------------------------------------
Surrogate Admin Status:

ENABLED

Port Mac Address:

10-00-f1-0b-58-00

Ring Segment:

0000

Ring Utilization:

0.0%

REM Admin Status:

ENABLED

REM Oper Status:

Active

CRS Admin Status:

ENABLED

CRS Oper Status:

Active

8260A>

Figure 133. Displaying the Status of Surrogate Features

Once the surrogate features are enabled, you may enable the individual
surrogate options within the surrogate groups, using the following commands:

SET TR_SURROGATE {slot.subslot} REM_STATUS {options}

SET TR_SURROGATE {slot.subslot} CRS_STATUS {options}

SET TR_SURROGATE {slot.subslot} CRS_STATIONS {options}

For details of the permitted options, please refer to the

 DMM Command Guide,

SA33-0275.

You can display the status of individual options within each surrogate group
using the following commands:

•

Status of REM options

SHOW TR_SURROGATE {slot.subslot} REM_STATUS

An example of the output from this command is shown in Figure 134 on
page 235.

8260 Multiprotocol Intelligent Switching Hub