TP-LINK T1500-28PCT Manual Do Utilizador
185
lldp med-location
Description
The lldp med-location command is used to configure the Location Identification
TLV's content in outgoing LLDPDU of the port.
TLV's content in outgoing LLDPDU of the port.
Syntax
lldp med-location { emergency-number identifier | civic-address { [ language
language ] [ province-state province-state ] [ county county] [city city ] [ street
street ] [ house-number house-number ] [name name ] [ postal-zipcode
postal-zipcode ] [ room-number room-number ] [ post-office-box post-office-box ]
[ additional additional ] [ country-code country-code ] [ what { dhcp-server |
endpoint | switch } ] }
language ] [ province-state province-state ] [ county county] [city city ] [ street
street ] [ house-number house-number ] [name name ] [ postal-zipcode
postal-zipcode ] [ room-number room-number ] [ post-office-box post-office-box ]
[ additional additional ] [ country-code country-code ] [ what { dhcp-server |
endpoint | switch } ] }
Parameter
emergency-number —— Emergency Call Service ELIN identifier, which is used
during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP.
The length of this field ranges from 10 to 25 characters.
during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP.
The length of this field ranges from 10 to 25 characters.
civic-address —— The civic address is defined to reuse the relevant sub-fields
of the DHCP option for civic address based Location Configuration Information
as specified by IETF.
of the DHCP option for civic address based Location Configuration Information
as specified by IETF.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Configure the civic address in the Location Identification TLV's content in
outgoing LLDPDU of port 2. Configure the language as English and city as
London:
outgoing LLDPDU of port 2. Configure the language as English and city as
London:
T1500-28PCT(config)# interface fastEthernet 1/0/2
T1500-28PCT(config-if)# lldp med-location civic-address language English
city London
lldp med-status
Description
The
lldp med-status command is used to enable the LLDP-MED feature for the
corresponding port. After the LLDP-MED feature is enabled, the port's Admin