TP-LINK T1500-28PCT Manual Do Utilizador

186

Status will be changed to Tx&Rx. To disable the LLDP-MED feature for the
corresponding port, please use

no lldp med-status command.

Syntax

lldp med-status
no lldp med-status

Command Mode

Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)

Example

Enable the LLDP-MED feature for port 1/0/2:

T1500-28PCT(config)# interface fastEthernet 1/0/2

T1500-28PCT(config-if)# lldp med-status

lldp med-tlv-select

Description

The

lldp med-tlv-select command is used to configure LLDP-MED TLVs to be

included in outgoing LLDPDU for the corresponding port. To exclude
LLDP-MED TLVs, please use

no lldp med-tlv-select command. By default, All

TLVs are included in outgoing LLDPDU.

Syntax

lldp med-tlv-select { [inventory-management] [location] [network-policy]
[power-management] [all] }
no lldp med-tlv-select { [inventory-management] [location] [network-policy]
[power-management] [all] }

Command Mode

Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)

Example

Exclude “network policy” and “inventory” TLVs in LLDPDU outgoing from port
1/0/2:

T1500-28PCT(config)# interface fastEthernet 1/0/2

T1500-28PCT(config-if)# no lldp med-tlv-select network-policy

inventory-management