TP-LINK T1500-28PCT Manual Do Utilizador

no storm-control broadcast

Parameter

rate —— Specify the bandwidth for receiving broadcast packets on the port. The
packet traffic exceeding the bandwidth will be discarded. By default, the value is
“128K”.

Command Mode

Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)

Example

Enable the broadcast control function for port 5:

T1500-28PCT(config)# interface fastEthernet 1/0/5

T1500-28PCT(config-if)# storm-control broadcast

storm-control multicast

Description

The

storm-control multicast command is used to enable the multicast control

function. To disable the multicast control function, please use

no storm-control

multicast command. Multicast control function allows the switch to filter
multicast in the network. If the transmission rate of the multicast packets
exceeds the set bandwidth, the packets will be automatically discarded to avoid
network broadcast storm.

Syntax

storm-control multicast [rate rate]
no storm-control multicast

Parameter

rate —— Select the bandwidth for receiving multicast packets on the port. The
packet traffic exceeding the bandwidth will be discarded. By default, the value is
“128K”.

Command Mode

Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)

Example

Enable the multicast control function for port 5:

T1500-28PCT(config)# interface fastEthernet 1/0/5