Powerware P93 Manual Do Utilizador

A 7x24 corrective maintenance coverage
A 7x24 annual performance check
A Annual power protection audit
A 7x24 remote monitoring advance response 
A Monthly UPS performance report with web access to account information and site service activity

Concurrent with UPS purchase

155102012-001

7001

97P2657

0

4

Non-concurrent to UPS purchase

155102013-001

7002

97P2658

0

4

The ConnectUPS-X Web/SNMP/xHub card provides real-time UPS monitoring and control of power throughout both 100Mb and 10Mb networks. When used
in conjunction with NetWatch Client software, it also provides graceful shutdown of the operating system of up to 255 computers powered by a single UPS.
The advanced features of the ConnectUPS-X include:
A Real-time, enterprise-wide monitoring provides valuable information for analysis of critical power conditions and problem identification
A Supports 100Mb and 10Mb Ethernet networks
A Built-in three ports switching hub adds three 10/100Mb network connections with no additional expense
A Monitoring via Web using computer (through standard Web Browsers, e.g. Internet Explorer and Netscape). PDA or cell phone provides easy, anywhere,

anytime access

A Monitoring via SNMP using Network Management Software packages (e.g. Tivoli, CA Unicenter and HP Openview)
A Analysis of chronic power problems and determination of trends through data logging and sophisticated graphic tools

The ConnectUPS MultiServer card is an X-Slot connectivity device that provides serial connection to up to five computers for unattended, graceful shutdown
and power monitoring. The card operates in conjunction with LanSafe software (included with UPS). The advanced features of the MultiServer card include:
A Real-time monitoring of critical power parameters
A Graceful, unattended shutdown of multiple computers
A Maximizes uptime of more critical loads through operation in tandem with load segment feature of UPS
A Supports simple signaling (relay contacts) through additional DB-9 port

The Powerware Relay Interface card is an X-Slot connectivity device that provides monitoring of UPS status through isolated, dry contact, Form-C relays. 
It also provides the interface for AS/400 computers as well as many industrial applications. The advanced features of the Relay Interface card include:
A Isolated, dry contact, Form-C relays for “utility failure”, “low battery”, “UPS alarm /OK” or “on bypass”
A User-selectable “normally open” or “normally closed” contacts
A Remote shutdown of UPS through integrated shutdown function
A Hot-swappable – UPS maintains power to critical applications while changing cards

ConnectUPS X-Slot Web/SNMP card

103002974-5501

2934

53P4619

0

2*

ConnectUPS X-Slot MultiServer card

05146447-3901

2933

04N7027

0

2*

ConnectUPS Relay Interface card & cable

103003564

2936

97P3886

0

2*

Three (3) NEMA non or locking receptacles (outlets) with breakers and connectors. Each connector shall be on a cord with maximum length of 50 feet.
Choose from:

5-15R duplex

4

1412, 1413, 2960 + 9082

86G7648

9800

31L7061, 2, 4

5-20R duplex

-

-

-

-

-

L5-15R

7

2960 + 9083, + 9082

-

-

31L7067, 8

L5-20R

-

-

-

-

-

L5-30R

-

-

-

-

-

6-15R

5

1410, 1403, 1411, 1451, 1452, 1457, 2961 & 9082

183576, 4, 3

9909, 9833

-

L6-15R

10

1414, 1416, 1453, 1454, 1458

186G7878, 9

-

31L7070, 1

6-20R

29

1400, 1401, 1423

-

-

-

L6-20R

11

1404, 1406, 1428

-

-

-

L6-30R

12

1424, 1426

11F0113, 4

-

-

Output power cords (NEMA)

103003673

9881

97P2660

0

6*