Toshiba ProT1!0 Manual Do Utilizador

To check if the computer’s Camera is malfunctioning or not, follow the troubleshooting 
procedure below as instructed. 

Procedure 1:   Camera Execution Check 
Procedure 2:   Connect Check and Replacement Check 

Open photo/video tool to look if there is an image. If not, go to Procedure 2. 

The CCD cable is connected to system board. If camera malfunctions, its connection may be 
defective or CCD cable and system board may be faulty. 

Check 1  Make sure the other side of CCD cable is correctly and firmly inserted to the CN1 

in MB. If the problem still occurs, perform Check 2. 

 

Check 2  CCD cable may be faulty. Replace it with a new one. If the problem still occurs, 

perform Check 3. 

Check 3  Camera may be faulty. Replace it with a new one following the instruction in 

Chapter 4. 

Check 4  System board may be faulty. Replace it with a new one following the instruction in 

Chapter 4.