Toshiba ProT1!0 Manual Do Utilizador

Procedure 1:   Sound Recorder Execution Check 

ement Check 

Open accessory to find sound recorder tool, try to record a length of sound, and then replay it 

 or CCD cable and system board 

may be faulty. 

Check 1 

d firmly inserted to the CN1 

in MB. If the problem still occurs, perform Check 2. 

Microphone troubleshooting can following below procedures as instructed. 

Procedure 2:   Connect Check and Replac

to see if microphone is working normal. If not, go to Procedure 2. 

The Microphone is combined with CCD cable which is connected to system board. If 
microphone malfunctions, its connection may be defective

Make sure the other side of CCD cable is correctly an

 

Check 2  CCD cable or Microphone may be faulty. Replace it with a new one. If the 

problem still occurs, perform Check 3. 

n in 

 

Check 3  System board may be faulty. Replace it with a new one following the instructio

Chapter 4.