Savin C3528 Manual Do Utilizador

Polling Reception

Depending which method you
are using, choose one of the fol-
lowing procedures:

Default ID Polling Reception

A Press the <

< or >

> key to select

the Default ID.

ID Override Polling Reception

A Press the <

< or >

> key to select

the Override ID.

B Enter a polling ID (4 charac-

ters) with the number keys and
the letter (A–F).

Note

❒ If you make a mistake, press

the

{Clear/Stop} key and try

again.

❒ 0000 and FFFF is not available.

Press [OK].
The Transmission Mode menu is
shown. A check mark is added to
“Polling RX”.

Note

❒ To cancel the Polling Reception,

press [Cancel]. The Transmis-
sion Mode menu is shown.

Press [Exit].
The following display is shown.

Note

❒ “Polling RX” is displayed.

Dial and press the

{{{{Start}}}} key.

Polling Reserve Report

This report is printed after Polling Re-
ception has been set up.

Note

❒ By default, this report is turned off.

Turn it on with the User Parame-
ters.

⇒ P.130 “Changing the User

Parameters”(Switch03, Bit3)

Polling Result Report

This report is printed after a Polling
Reception has been completed and
shows the result of the Polling Recep-
tion.

Note

❒ You can also check the result of a

Polling Reception with the TCR.

❒ By default, this report is turned on.

Turn it off with the User Parame-
ters.

⇒ P.130 “Changing the User

Parameters”(Switch03, Bit4)

Us98-3.tif

Us98-4.tif

Us99-1.tif

Us99-2.tif