Savin C3528 Manual Do Utilizador
Transfer Request
53
3
C
Enter the “Transfer Request” func-
tion number with the number keys.
tion number with the number keys.
Note
❒ If the appropriate display is not
shown, press [
↑↑↑↑Prev.] or [↓↓↓↓Next].
D
Enter a Transfer Stations and
press [Recv. Stn].
press [Recv. Stn].
Note
❒ Enter the fax numbers of the
Transfer Stations with either
Quick Dials, Speed Dials or the
number keys.
Quick Dials, Speed Dials or the
number keys.
❒ If you make a mistake, press the
{Clear/Stop} key and try again.
❒ To cancel the Transfer Request,
press [Cancel]. The Transmis-
sio n M o d e m en u i s sh o wn
again.
sio n M o d e m en u i s sh o wn
again.
E
Enter one or more End Receivers.
Note
❒ You cannot enter the numbers
of the End Receivers directly.
The numbers must be stored in
Quick Dials, Speed Dials or
Groups in the Transfer Sta-
tion(s). To specify an End Re-
ceiver, use the special format
described in.
The numbers must be stored in
Quick Dials, Speed Dials or
Groups in the Transfer Sta-
tion(s). To specify an End Re-
ceiver, use the special format
described in.
⇒ P.54 “Specifying
an End Receiver”
❒ Press [Add RcvStn] if you wish
enter more End Receivers.
❒ Press the < or > key to see the
End Receivers already entered.
You can select an End Receiver
from this list and cancel it by
pressing the
You can select an End Receiver
from this list and cancel it by
pressing the
{Clear/Stop} key.
❒ To cancel the Transfer Request,
press [Cancel].
F
When you have specified all the
End Receivers, press [OK].
End Receivers, press [OK].
G
If you want to enter an additional
Transfer Station, press [Yes] and
repeat steps
Transfer Station, press [Yes] and
repeat steps
DDDD to FFFF.
If you press [No], the Transmission
Mode menu is shown and a check
mark is added to “Transfer Re-
quest”.
Mode menu is shown and a check
mark is added to “Transfer Re-
quest”.
Us94-2.tif
L2GB003.tif
L2GB004.tif
Us103-1.tif