Datacard Group 450 Manual Do Utilizador

 

12 

Windows 95 and 98 Printer Driver Installation and Technical Reference 

9. 

Click OK to close the dialog box. 

10. 

Click OK on the Properties dialog box to save your settings. Go on to the printer 
configuration options procedure for your printer. 

The following procedure tells how to change the 150i printer configuration to work 
with the printer driver. The instructions begin with the printer powered off. 

1. 

Power ON the 150i. When “150i/CPX” is displayed, immediately press the # 
key. 

  The # key must be pressed before the machine enters the Ready mode to 

access the Setup Menu. 

  The printer scrolls through the Setup Menu as you press the # key. Within 

an option, press 0 to scroll through the choices available. When the 
appropriate choice is displayed, press the # key to accept the choice and 
move on to the next option. 

2. 

Make the following selections: 

Baud = 9600 
Parity = None 
Bits = 8 
Monitor = No 
TestCard = (appropriate setting) 
Save Changes = Yes 

After Save Changes = Yes is accepted, the printer will reset. Allow it to go to 
Ready mode.