Datacard Group 450 Manual Do Utilizador

 

Windows 95 and 98 Printer Driver Installation and Technical Reference 

13 

The following procedure tells how to change the 28x printer configuration to work 
with the printer driver for Windows 95 or 98. The instructions begin at the main 
menu of the printer’s display window. 

Setting Customer Engineer Configuration Options 

1. 

At the Datacard 28x printer front panel, press Esc to go to the Main Menu.  

2. 

Press F3 to choose Set Up. 

3. 

Select F3 to choose Customer Engineer.  

4. 

When prompted for an access code, press F2 and then F1. 

5. 

Press F1 to choose the configuration menu. 

6. 

Verify and set the configuration options identified below. Use the function keys 
(F1, F2, and F3) to scroll through menus, select a menu, select menu options, 
and save options.  

System Page Select 

System Page Menu 

Page = CPX Format 

Use High Baud Rate = On 

Baud Rate Menu 

Baud = 57600 

NAK Busy Used = On 

Send Pause Status = On 

Host Comm. 

Data Bits and Parity Menu  

Parity = 8 bit None 

Ignore Transmit Error = On  

Use Comm. Translation Table = Off  

Check Card Limits Error 

Card Limits Error = On 

  For 486-based workstations and below, in the System Page Select Menu, 

choose Use High Baud Rate = OFF and in the Host Comm. Menu choose 
Baud Rate = 19200. 

7. 

Press Esc twice to return to the Set Up Menu.