ZyXEL Communications wireless n gigbit router zyxel Manual Do Utilizador
NBG-460N User’s Guide
313
C
H A P T E R
27
Product Specifications and Wall-
Mounting Instructions
The following tables summarize the NBG-460N’s hardware and firmware features.
Table 118 Hardware Features
Dimensions (W x D x
H)
H)
190 x 150 x 33 mm
Weight
362g
Power Specification
Input: 120~240 AC, 50~60 Hz
Output: 18 V DC 1A
Ethernet ports
Auto-negotiating: 10 Mbps, 100 Mbps or 1000Mbps in either half-
duplex or full-duplex mode.
duplex or full-duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet
cables.
cables.
4-5 Gigabit Port
Switch
Switch
A combination of switch and router makes your NBG-460N a cost-
effective and viable network solution. You can add up to four
computers to the NBG-460N without the cost of a hub when
connecting to the Internet through the WAN port. You can add up
to five computers to the NBG-460N when you connect to the
Internet in AP mode. Add more than four computers to your LAN
by using a hub.
effective and viable network solution. You can add up to four
computers to the NBG-460N without the cost of a hub when
connecting to the Internet through the WAN port. You can add up
to five computers to the NBG-460N when you connect to the
Internet in AP mode. Add more than four computers to your LAN
by using a hub.
LEDs
PWR, LAN1-4, WAN, WLAN, WPS
Reset Button
The reset button is built into the rear panel. Use this button to
restore the NBG-460N to its factory default settings. Press for 1
second to restart the device. Press for 5 seconds to restore to
factory default settings.
restore the NBG-460N to its factory default settings. Press for 1
second to restart the device. Press for 5 seconds to restore to
factory default settings.
WPS button
Press the WPS on two WPS enabled devices within 120 seconds
for a security-enabled wireless connection.
for a security-enabled wireless connection.
Antenna
The NBG-460N is equipped with three 2dBi (2.4GHz) detachable
antennas to provide clear radio transmission and reception on the
wireless network.
antennas to provide clear radio transmission and reception on the
wireless network.
Operation
Environment
Environment
Temperature: 0º C ~ 40º C
Humidity: 20% ~ 85% RH (Non-condensing)
Storage Environment Temperature: -20º C ~ 60º C
Humidity: 20% ~ 90% RH (Non-condensing)