ZyXEL Communications wireless n gigbit router zyxel User Manual

NBG-460N User’s Guide

The following tables summarize the NBG-460N’s hardware and firmware features.

Table 118   Hardware Features

Dimensions (W x D x 
H) 

190 x 150 x 33 mm

Weight

362g

Power Specification

Input: 120~240 AC, 50~60 Hz

Output: 18 V DC 1A

Ethernet ports

Auto-negotiating: 10 Mbps, 100 Mbps or 1000Mbps in either half-
duplex or full-duplex mode.

Auto-crossover: Use either crossover or straight-through Ethernet 
cables.

4-5 Gigabit Port 
Switch

A combination of switch and router makes your NBG-460N a cost-
effective and viable network solution. You can add up to four 
computers to the NBG-460N without the cost of a hub when 
connecting to the Internet through the WAN port. You can add up 
to five computers to the NBG-460N when you connect to the 
Internet in AP mode. Add more than four computers to your LAN 
by using a hub.

LEDs

PWR, LAN1-4, WAN, WLAN, WPS

Reset Button

The reset button is built into the rear panel. Use this button to 
restore the NBG-460N to its factory default settings. Press for 1 
second to restart the device. Press for 5 seconds to restore to 
factory default settings.

WPS button

Press the WPS on two WPS enabled devices within 120 seconds 
for a security-enabled wireless connection.

Antenna

The NBG-460N is equipped with three 2dBi (2.4GHz) detachable 
antennas to provide clear radio transmission and reception on the 
wireless network. 

Operation 
Environment

Temperature: 0º C ~ 40º C

Humidity: 20% ~ 85% RH (Non-condensing)

Storage Environment Temperature: -20º C ~ 60º C

Humidity: 20% ~ 90% RH (Non-condensing)