RAD Data comm Modular Access Device with Integrated Router Manual Do Utilizador

Página de 224
FCD-IPM Installation and Operation Manual 
Chapter 4  Configuration 
 
Security Setup Menu 
4-19 
IP Address Translation permits some, or all, PCs on your private LAN to be 
represented with legal IP Addresses that are defined on the internet/Intranet (refer 
to
 
FCD-IPM supports the IP Address Translation types listed in 
Table 4-7.  IP Address Translation (NAT) Settings 
Parameters Description 
Static Single
 
A PC with its Virtual Address specified will have access to the Internet/Intranet with a legal, 
real IP Address. Bidirectional one-to-one access is allowed. 
Static Range
 
PCs with their Virtual Addresses within the specified range will have access to the 
Internet/Intranet with a legal, real IP Address range. Bidirectional N-to-N access is allowed. 
Concurrent
 
A number of PCs (n) with their Virtual Addresses within the specified range will have access, 
but only some of them (m) can work simultaneously (m<n). The application must be started 
from the private LAN. 
Transparent
 
Address translation is not performed for a specified range of IP Addresses. This setup may be 
used for the application shown in 
PAT (Port 
Address 
Translation)
 
FCD-IPM connects a UDP or TCP port to a specified IP address. PAT is available for single IP 
only. 
Single IP
 
The whole Private LAN is represented as a single legal IP Address on Internet/Intranet. 
Servers with Legal IP Addresses
for Outgoing Services
Pubic Internet/
Intranet
FCD-IPM
...
PC#1
PC#2
PC#n
 
Figure 4-13.  IP Address Transparent 
 
For Static and Concurrent Address Translation, all PCs on your LAN with IP 
Addresses not covered by the listed definitions will not obtain access to the 
Internet/Intranet. 
You may enter more than one entry of each type. 
Each definition in a list may be Enabled or Disabled separately. 
 
Note