Adtran L128 Manual Do Utilizador
Chapter 3: Terminal Menu Operation and Structure
61202.070L1-1
Express L128/L128T User Manual
77
Dial Out/Attempts
Write security: 3; Read security: 5
This value is the number of attempts the Express L128/L128T will make before
giving up on the connection. This is effective for manual dialing or dynamic
bandwidth calls only. The range is from 1 (def) to 255.
This value is the number of attempts the Express L128/L128T will make before
giving up on the connection. This is effective for manual dialing or dynamic
bandwidth calls only. The range is from 1 (def) to 255.
Dial Out/Initial Channels
Write security: 3; Read security: 5
This is the number of B-channels to dial-up on the initial connection. Possible
choices are 1 (def) and 2.
This is the number of B-channels to dial-up on the initial connection. Possible
choices are 1 (def) and 2.
Connection List/Bandwidth
The bandwidth parameters that govern this connection are set here.
Bandwidth/On Demand
The parameters under this menu control the data rates required to change
bandwidth.
bandwidth.
Bandwidth/Mode
Write security: 3; Read security: 5
When this option is set to On, the Express L128/L128T will apply its band-
width-on-demand features for this Connection List profile. If set to Off, none
are performed.
When this option is set to On, the Express L128/L128T will apply its band-
width-on-demand features for this Connection List profile. If set to Off, none
are performed.
Bandwidth/Idle Timeout
Write security: 3; Read security: 5
This is the number of seconds the ISDN line must be idle before hanging up
this connection. A value of 0 (def) means the Express L128/L128T will never
drop the link based on the idle timer. The range is 0 to 255.
This is the number of seconds the ISDN line must be idle before hanging up
this connection. A value of 0 (def) means the Express L128/L128T will never
drop the link based on the idle timer. The range is 0 to 255.
Bandwidth/Preempt Time
Write security: 3; Read security: 5
Occasionally an application will require to connect to a different location be-
fore the current connection’s idle timer has timed out. This causes the appli-
cation to have to wait for idle timer before it can use the B-channel. This
preempt time allows the Connection List that is active to be dropped sooner
than the normal idle time. The value ranges from 0 to 255 and is in seconds.
Occasionally an application will require to connect to a different location be-
fore the current connection’s idle timer has timed out. This causes the appli-
cation to have to wait for idle timer before it can use the B-channel. This
preempt time allows the Connection List that is active to be dropped sooner
than the normal idle time. The value ranges from 0 to 255 and is in seconds.