Adtran L128 Manual Do Utilizador

Chapter 3: Terminal Menu Operation and Structure

61202.070L1-1

Express L128/L128T User Manual

Write security: 3; Read security: 5
This is the number of  WAN data rate samples taken before a decision to 
change bandwidth is performed.  The range is 1 (def) to 255 samples. 

Write security: 3; Read security: 5
This value is the minimum time between bandwidth changes for this Connec-
tion List profile.  The range is 0 to 255 seconds.  The default is 60 seconds.

The Express L128/L128T can block packets in and out of a WAN port by use 
of the filters.  These filters are set up on a per-Connection List profile basis.  
They are set up in two steps: 1) define the types of packets that would be of 
interest in the Configuration/Security/Filter Defines menu, and 2) set up the 
filter type and combination of defines that will cause a packet block.

Write security: 2; Read security: 5
The packets which come into the Express L128/L128T can be filtered in three 
ways:

 (def) - Turns off packet input filtering. No incoming

packets are blocked.

 - All incoming packets from the WAN are blocked

except as defined in the Filters/In Exceptions list.

 - All incoming packets from the WAN are not

blocked except as defined in the Filters/In Exceptions list.