Delta Electronics ASDA-B Series Manual Do Utilizador

Revision January 2009 

 

 

4-1

 

This chapter describes the basic operation of the digital keypad and the features it offers. 

There are several modes of operation:  

Monitor, Parameter, Parameter Setting, Save, Write and Fast Edit Mode.  

In Monitor mode, users can display the monitor status. In Parameter mode, users can display and view the 

parameter name, unit and setting value, and also can navigate in parameter groups. In Parameter Setting 

mode, users can edit and change the parameter setting value. In Save mode, it allows users to save the 

parameters stored in PC or the servo drive into the digital keypad. In Write mode, it allows users to write the 

parameters out of the digital keypad and restored in the servo drive. Please note that the status monitor 

function of the servo drive is disabled and the LED indicators on the digital keypad are invalid at this time 

when in Save mode and Write mode. In Fast Edit mode, users can edit the parameters more quickly. Also, 

static and dynamic auto-tuning is also provided in this mode. 

If users desire to upgrade the firmware version of the digital keypad, please open the rear case of the keypad 

and turn the switch to BOOTLOAD. Then, execute the PC program and the firmware will be upgraded. 

For the keypad parameters and fault messages (Alarm codes), please refer to Chapter 7 and Chapter 10. 

The digital keypad includes the ASD-PU-01A display panel and function keys. The Figure 4.1 shows all 

of the features of the ASD-PU-01A digital keypad and an overview of their functions.  

Figure 4.1