Heath Zenith 598-1143-01 Manual Do Utilizador
-3-
598-1143-01
12345678
1234
5
6
7
Inside Push
Button
Strobe/Tune Settings
Your wireless chime has different selectable tunes:
Ding-Dong (two flashes/two
notes/two flashes) or
Westminster (eight flashes/eight notes/eight flashes). The
factory setting is for the Westminster tune. This tune can be changed by following
the instructions below.
•
the instructions below.
•
Ding-Dong (Two note tune)
Strobe will flash two times, play the two note tune, then flash two more
times.
Push button: Add a jumper to location 8.
•
•
Westminster (Eight note tune)
Strobe will flash eight times, play the eight note tune, then flash eight more
times.
Push button: Remove jumper from location 8.
Push button Battery Replacement
Install an alkaline type A23 12 Volt battery.
See diagram inside push button for correct
battery orientation.
See diagram inside push button for correct
battery orientation.
* Code Settings 1-7
Must Match Both
Push Button and
Chime
Remove screw to
open access door
Tune Setting
Back of
Chime
Note: Some models might require the use of
tweezers to remove and replace the jumpers.