Panasonic WJ-MPU955A Manual Do Utilizador

55

■ Operation Start (Login)

1. Turn on the power switches of all system components.

2. Turn on the power of system controller. (Refer to the

Operating Instructions.)
The OPERATE indicator will light up, and the following
message will appear on the LCD.

Note: Wait unitl the following display appears on the LCD.

3. Enter the ID number by pressing the numeric buttons.

Then, press the CAM (SET) button. "PWD" will appear
on the LCD.

Note: When you have entered a wrong ID number,

press the CLEAR button.

4. Enter the password by pressing the numeric butons. 

5. Press the CAM (SET) button.

When the password is correct, "OK" will apear for 2
seconds on the LCD.

Note: When the password is wrong, "NG" will appear

for 2 seconds on the LCD. In this case, retry the
login procedure.

Note: If you perform the login procedure after resetting the

CPU unit or turning on the power of CPU unit, the LCD
display may return to Step 2. In this case, wait for
approx. 5 minutes until the CPU unit has been started
up. Then, retry the login procedure.

■ Operation End (Logout)

You need to log out of the system:

• When leaving the controller
• When system access is no longer required

1. During the login status, press the MON LOCK/LOGOUT

button while holding down the SHIFT button.

2. You will log out of the system, and the LCD display will

return to the login standby display.

■ ID Display Function

You can check the following on the LCD. (Refer to p. 82 for
how to display.)

• Operator ID
• Controller ID
• System version

     ID:           

     Unit:01

     ID:12345      

     PWD:

     ID:12345      

     PWD:

∗ ∗ ∗ ∗ ∗

 MON PWD:OK     CAM

     Unit:01

     ID:           

     Unit:01

     ID:12345      

     PWD:NG

Connecting to

        Main CPU ...