Panasonic WJ-MPU955A Manual Do Utilizador

56

After the login procedure, the following operations are avail-
able to control the system.
The operation begins with monitor selection. Then, the
image of selected camera appears on the active monitor.

■ Monitor Selection

1. Select the desired monitor number by pressing the

numeric buttons. The entered number will appear on
the LCD.

2. Press the MON (ESC) button. 

When the selected monitor number is correct, <" is dis-
played.

Note: To select the next or previous monitor number, press

the + or – button.

■ Camera Selection

1. Select the desired camera number by pressing the

numeric buttons. The entered number will appear on
the LCD.

2. Press the CAM (SET) button. 

When the selected camera number is correct, >" is dis-
played.

Note: To select the next or previous camera number, press

the + or – button.

■ Monitor Lock

Monitor lock is the function to retain other operators' control
of a monitor even after that operator has selected another
monitor.

Note: This function will prevent operators with a lower prior-

ity from gaining control of a monitor. However, opera-
tors with a higher or the equal priority can gain the con-
trol of monitor.

1. Select a desired monitor. (Refer to Monitor Selection.)

2. Press the MON LOCK/LOGOUT button. The monitor

lock mode is activated, the monitor number with "L"
sign is displayed on the active monitor, and "L" will
appear beside "MON" on the LCD.

Note: Every time you press the MON LOCK/LOGOUT

button, the monitor lock mode will be activated or
deactivated.

 MON  123       CAM

      Unit:01

 MON            CAM

0123<Unit:01

 MON 512      CAM

0123<Unit:01

 MON            CAM

0123 Unit:01  >00512

LMON            CAM

0123 Unit:01   00512