Panasonic WJ-MPU955A Manual Do Utilizador

65

Every time you press the ALARM/ALM SUSPEND but-
ton while holding down the SHIFT button, all alarms will
be armed or disarmed.

Note: To arm or disarm an alarm, activate Allow Disarm for

the alarm. (Refer to the Admin Console User's Guide
for details.)

■ To Operate Alarm-related

You can operate the camera associated with the alarm
action as follows:

1. Perform Step 1 and 2 of Alarm Selection.

2. Enter a desired alarm action number by pressing the

numeric buttons. 

Note: If you skip this step, Alarm Action #0 will be

specified.

3. Press the ACK button.

"Ack:nn" will appear on the LCD.

4. Control the cameras with the system controller.

(Refer to p. 58 Camera Site Accessories Control.)

Note: To select another alarm, press the ALARM/ALM

SUSPEND button. The ACK status will be canceled
(cancelled). Then, enter the alarm action number
by pressing the numeric buttons, and press the
ALARM/ALM SUSPEND button again.

 MON            CAM

0123 ALL Arm   00512

 MON            CAM

0123 ALLDisarm 00512

 MON 9          CAM

0123  Active   00512

 MON Alarm00001  CAM

0123 Ack:9     00512

■ To Cancel Alarms

1. Perform Step 1 to 2 of p. 64 Alarm Selection.

2. Press the ALM RESET/ALM ALL RESET button to reset

the alarm. "Reset" will be displayed on the LCD.

• To reset all the alarms at a time, press the ALM

RESET/ALM ALL RESET button while holding down
the SHIFT button.

• After the alarm is deactivated, "Armed" or "Cleared"

will be displayed on the LCD.

 MON Alarm00001 CAM

0123  Reset    00512

 MON Alarm00001 CAM

0123 ALL Reset 00512

 MON Alarm00001 CAM

0123  Armed    00512

 MON Alarm00001 CAM

0123  Cleared  00512