Panasonic WJ-MPU955A Manual Do Utilizador

66

■ Alarm History Table

There are 1000 alarm records stored in chronological order
in 125 pages of table.

1. Select a desired monitor. (Refer to p. 56 Monitor

Selection.)

2. Press the ALM RECALL button. "AlarmHist" will appear

on the LCD, and the ALARM HISTORY table will be dis-
played on the active monitor.

ALM: Logical alarm number
STATE: Indicates alarm state changes.

ARMED: The system is armed for alarm response.
ACTIVE: Alarm has been triggered and activated

assigned alarm response.

ACKED: Alarm is acknowledged and an operator

can control the alarm action.

RESET: Activated alarm is reset, but the alarm

device is still active.

DISARMED: The system is disarmed for alarm

response.

CLEARED: Auto arming is not set in the admin con-

sole.

DATE/TIME: Date and time when alarm state changes.

3. To display the next page, press the + button.

To display the previous page, press the – button.

• To display the first page of table, press the + but-

ton while holding down the SHIFT button.

• To display the last page of table, press the – button

while holding down the SHIFT button.

• Every time you press the button 0 while holding

down the MON (ESC) button, the monitor back-
ground will change beween camera images and
black picture.

4. To exit the ALARM HISTORY table, press the CLEAR

button while holding down the MON (ESC) button.

 MON AlarmHist  CAM

0123           00512