Casablanca Fan Company C8U47M AT1206 Manual Do Utilizador

↑

↑

↑

• Th

  e blades in each pack are matched for equal weight 

to assure smooth fan operation. If more than one fan is 
being installed, be careful not to mix blades from diff erent 
cartons.

•  Inspect the contents of your carton for possible shipping 

or handling damage and report any such damage directly 
to your authorized Casablanca dealer.

•  It is always a good idea to have an assistant to help with 

the installation.

•  When cleaning, painting, or working near your fan, be 

very careful of the fan and blades. Always turn the power 
OFF to the ceiling fan before servicing it, working on it, 
or replacing lightbulbs. 

•  Never insert anything into the path of the fan blades while 

the fan is in operation.

•  Never install a fan over a pool or spa. 

•  Never operate a fan that has been damaged in any 

way. Contact Casablanca Fan Company by calling 
1-888-227-2178, or contact your local authorized 
Casablanca dealer for assistance in obtaining service.

•  CAUTION: RISK OF ELECTRICAL SHOCK!  Installation is to be in accordance with the National Electrical Code, 

ANSI/NFPA 70-1999, and local codes.

 

All wiring must be performed in accordance with national and local electrical 

codes.  If you are unfamiliar with the wiring codes, you should use a qualifi ed electrician.  To avoid overheating and possible 
damage to other equipment, do not install control to a receptacle, fl uorescent light fi xture, motor operated appliance, or 
transformer-supplied appliance.

• Th

  is fan is designed to be installed on an existing electrical outlet box. Th

  e outlet box must be UL Listed for ceiling fan 

installations, if it is not, a new box must be installed. Casablanca extension poles are available for sloped or high ceiling 
installations.

• Th

  is ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. Th

 e maximum 

current requirement for the fan with light fi xture is 2.83 amps. Th

  e fan uses about 1 amp or 100 watts. Maximum light 

current is about 1.83 amps or 220 watts of lighting.

•  Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the canopy hatch, make 

sure all wires are within the canopy and that no wires are being pinched.

•  WARNING: Do not bend the blade brackets when installing the brackets, balancing the blades or cleaning the fan. Do not 

insert foreign objects in between the rotating fan blades.

•  WARNING: To reduce the risk of fi re or electric shock, do not use this fan with any solid state speed control device. Use 

only the control provided with or recommended for this fan.

Unpacking

Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them against the parts 
listed in the parts guide. Before discarding packaging material, be certain that all parts have been removed.