Scientific Atlanta 573480 Manual Do Utilizador

573497 Rev B

8

You can use the 

 button on your AllTouch Remote Control to set up

your:

• Cable digital audio receiver
• CD player
• Home automation device

To make the remote control work with other devices, follow this
procedure.

1. Find the code for your brand of device in the back of this guide.

You may find more than one code for your particular brand. Start
with the first choice.

2. Press and release 

, then hold down 

 until

the red light blinks twice.

Note: You may need to wait a few seconds for the
red light to blink twice.

3. Enter your 3-digit device code–the red light should

blink twice again. (If the red light does not blink
twice, return to step 1 and try again.)

4. Point your AllTouch Remote Control at your device

and press 

POWER

.

5. Did your device turn off (or on)?

• If yes, you are finished setting up your device.

Write your code on page 31.

• If no, go to step 6.

Note: You may want to try several functions of your device to
verify operation. Button operation (for example, CH ▲▼, LAST,
INFO, etc.) will depend on the AUX device programmed.

6. If your device did not respond, repeat steps 2 through 5 trying all

of the codes (one at a time) under your brand.

7. If your device still did not respond, turn to All Search on page 10

and follow the steps.

VCR

AUX

TV

CBL

T6056