Vertex Standard FT-1000MP Manual Do Utilizador
page 33
MARK-V FT-1000MP Operating Manual
10. PKT
This control adjusts the tuning meter segment indi-
cations for Packet center tuning.
11. RTTY
This control adjusts the tuning meter segment indi-
cations for RTTY center tuning.
12. CW
This control adjusts the tuning meter segment indi-
cations for CW center tuning. It should be adjusted
such that the center segment lights up when your fa-
vorite pitch (as set by the CW PITCH control and con-
firmed by pressing the [SPOT] button) is received.
such that the center segment lights up when your fa-
vorite pitch (as set by the CW PITCH control and con-
firmed by pressing the [SPOT] button) is received.
Additional Note
The volume of the beep that sounds when a front-
panel button is pushed can be adjusted by turning
a trimmer accessed via the small hole on the bot-
tom cover of the transceiver. Insert a small, thin,
insulated, flat screwdriver into the hole to adjust
VR3001 for the desired beep volume. The Beep
tone frequency is adjusted via menu selection 4-2;
see page 101.
panel button is pushed can be adjusted by turning
a trimmer accessed via the small hole on the bot-
tom cover of the transceiver. Insert a small, thin,
insulated, flat screwdriver into the hole to adjust
VR3001 for the desired beep volume. The Beep
tone frequency is adjusted via menu selection 4-2;
see page 101.