Toshiba 42SL417U Manual Do Utilizador

• Check that the router/AP (Access point) power is ON.
• After starting wireless network setup, confirm that the 

network is configured properly by performing the network 
connection test (

- p. 59).

• Check the router/AP’s connection status (- p. 57).
• If the router/AP does not support PBC or WPS, Easy Setup 

(PBC) will not work even if the push-button is pressed.

• If the available router/AP list is not displayed in Easy Setup 

(PBC) or Assisted Setup, the power of the router/AP may be 
OFF. Check that it is ON, and then try re-starting the scan for 
available routers/APs.

• Refer to the router/AP’s instruction manual.

• If the date and time display on the NET TV menu is wrong, 

turn off the TV, and turn it on again.

• NET TV or Widgets may not be immediately available after 

turning the TV on while the system is booting.

• When NET TV or Widgets doesn't operate properly (a 

message window is displayed when 

 or 

 is 

pressed), do one of the following:
1) Turn off your TV. After 30 seconds, turn it on.
2) Turn off the TV and unplug the power cord. After 1 minute, 
plug the power cord in and turn on the TV.
3) Perform the Reset Yahoo! TV Widgets procedure 
(

- p. 63)

4) Perform the Reset Factory Defaults procedure (

- p. 44).

• Content delivered by NET TV or Widgets are the responsibility 

of the Content Service Provider. Contact the Service Provider 
to discuss any content issues. 

• Ensure that the devices (Display and Server) are connected 

correctly.

• Incorrect behavior may occur when using a USB HUB 

connection.

• Photo files that were processed and edited using the PC’s 

application software may not be viewable.

• When viewing content that supports two or more formats the 

display may select one format automatically.

• Copyright protected content stored on the DMS may not be 

playable on the display.

• Content playback stability may be affected by heavy network 

traffic.

• Content originally recorded on a PC may not play correctly.
• Set the media sharing of the DMS correctly, according to the 

DMS instruction manual.

• Confirm that the contents of either the DMS or the USB 

storage device are in formats that are supported by this TV 
(

- p. 66, 67, or 68).

• Depending on the DMS, access may be limited by the MAC 

address. Set the server according to the DMS’s instruction 
manual. This TV’s MAC Address can be confirmed in the 
Network Setup portion of the User Menu (

- p. 58).

• Depending on the DMS, it may take time to display the list.

The POWER and service LED lights on the front of the 
TV indicate the TV’s status, as described below.

The TV is operating properly.

The power is off or standby.

System booting. After a while, the screen appears.

Power-On Failure. Turn off the TV and unplug the 
power cord. After 1 minute, plug the power cord in 
again and turn on the TV.

Service LED
•Green blinks (if applicable)

Abnormal operation of BUS line. Turn off the TV and 
unplug the power cord. After 1 minute, plug the 
power cord in again and turn on the TV.

If the problem persists after trying the solutions:
•In the U.S., visit TAIS Consumer Solutions on the web 

at www.support.toshiba.com or call 1-800-631-3811.

•In Canada, locate the nearest Toshiba authorized 

service depot by directing your web browser to 
www.toshiba.ca

; click “Support,” and then click 

“Home Entertainment.”

Power LED

Service LED