JVC VR-N900U Manual Do Utilizador
7
Clock Display
The VR-N900U has a clock display function that displays the
current time on the screen.
current time on the screen.
1
Press the [2/ ] button while holding down the
[FUNCTION] button.
[FUNCTION] button.
Clock display appears on the screen.
Note
• To turn the clock display off, press the [2/
] button again
while holding down the [FUNCTION] button.
• To move the clock display position, left click and drag the
clock display to the desired position.
About Performance Meter
The VR-N900U comes with a performance meter to indicate
VR-N900U operating load.
At high operating loads, the system may not be able to
record at the preset frame rate or operate normally.
VR-N900U operating load.
At high operating loads, the system may not be able to
record at the preset frame rate or operate normally.
1
Press the [1/ ] button while holding down the
[FUNCTION] button.
[FUNCTION] button.
A performance meter is displayed on the screen.
Note
• The performance meter automatically displays when the
VR-N900U powers up.
• To turn the performance meter off, press the [1/
] button
again while holding down the [FUNCTION] button.
• To move the display position of the performance meter,
left click and drag it to the desired position.
CAUTION
• Do not use the recorder when the performance meter is
indicated in red.
Changing monitor resolution
Press the [ZOOM OUT/CANCEL] or the [ZOOM IN/ENTER]
button while holding down the [FUNCTION] button to
change VGA output resolution.
button while holding down the [FUNCTION] button to
change VGA output resolution.
CAUTION
• Selecting a resolution not supported by the monitor may
prevent normal monitor synchronization.
Setting/Canceling
Operation Lock
Operation Lock
The VR-N900U is equipped with an operation lock feature is
to prevent the system from being placed into OPERATE
OFF accidentally and prevent unauthorized recording
operations.
to prevent the system from being placed into OPERATE
OFF accidentally and prevent unauthorized recording
operations.
Setting Operation Lock
1
1
Press the [KEY] button while holding down the
[FUNCTION] button.
[FUNCTION] button.
Operation will be locked. The [LOCK] indicator lights up
when in operation lock mode.
when in operation lock mode.
Canceling Operation Lock
1
(When in operation lock mode) Press the [KEY]
button while holding down the [FUNCTION]
button.
button while holding down the [FUNCTION]
button.
Operation lock will be canceled. The [LOCK] indicator will
turn off.
turn off.
Load factor less than 5%
Indicated in gray
Load factor less than 60% Indicated in Green
Load factor less than 90% Indicated in Yellow
Load factor more than 90% Indicated in Red
[ZOOM IN/ENTER] button
Keypad
[FUNCTION] button
[KEY] button
[LOCK] indicator