Sanyo DSR - 300 Manual Do Utilizador

Página de 136
MENU-SPECIFIC SETTINGS
2
100
English
NETWO
R
K
 
SE
T
T
IN
G
S
(when optional interface board is installed)
When a multiplexer (sold separately) has been connected 
to the unit, you can make settings as described below.
Set the connected multiplexer’s manufacturer as described 
below.
1
Select the manufacturer of the 
multiplexer from the screen’s pull-down 
menu.
[Settings] (‹ indicates default setting.)
z
When a Sanyo, Sony, DM, Robot multiplexer or any 
other multiplexer capable of decoding channel 
information is connected, it will be possible to specify 
channel numbers for playback. For details regarding the 
playback method, see “Playing back recorded images” 
(JP. 113).
3. VIDEO INPUT SET
Multiplexer
Setting
Description
‹
NO USE
This item should be selected when no 
multiplexer is being used.
SANYO
As these multiplexers can decode channel 
information, whenever multiplexer images are 
being recorded, you will be able to indicate a 
camera number (i.e., channel information) from 
the recorded images for playback.
OTHERS1
This item should be selected when using a Sony 
multiplexer. Decoding of channel information will 
be possible.
OTHERS2
This item should be selected when using a DM 
or Robot multiplexer. Decoding of channel 
information will be possible.
OTHERS3
This item should be selected when using a 
multiplexer that has not been manufactured by 
Sanyo, Sony, DM, or Robot. 
e00_l8had_us_7.book  Page 100  Wednesday, March 10, 2004  2:47 PM