Sanyo DSR - 300 Manual Do Utilizador
MENU-SPECIFIC SETTINGS
2
102
English
NETWO
R
K
SE
T
T
T
IN
G
S
(when optional interface board is installed)
Set the permission for overwriting to recording areas or the
remaining-space warning level as described below.
remaining-space warning level as described below.
When the normal recording area has been filled with data,
this setting dictates whether recording will be stopped or
continued by overwriting the recorded images currently
stored on the hard disk.
this setting dictates whether recording will be stopped or
continued by overwriting the recorded images currently
stored on the hard disk.
1
Select “OVERWRITE” for normal
recording area.
recording area.
[Settings] ( indicates default setting.)
When the alarm recording area has been filled with data,
this setting dictates whether recording will be stopped or
continued by overwriting the recorded images currently
stored on the hard disk.
this setting dictates whether recording will be stopped or
continued by overwriting the recorded images currently
stored on the hard disk.
2
Select “OVERWRITE” for alarm
recording area.
recording area.
[Settings] ( indicates default setting.)
In situations where the overwrite setting for the normal
recording area and the alarm recording area is “OFF”, you
can have the unit issue a warning as soon as the
remaining space in either of these areas reaches a specific
level. (JP. 109)
The following section describes how to set the level at
which the warning will be issued.
recording area and the alarm recording area is “OFF”, you
can have the unit issue a warning as soon as the
remaining space in either of these areas reaches a specific
level. (JP. 109)
The following section describes how to set the level at
which the warning will be issued.
3
Setting the remaining-space warning
level.
level.
Setting range: 1% to 10% (in units of 1%)
z
If the overwrite setting for the normal recording area
and the alarm recording area is “ON”, the remaining-
space warning level will be displayed as “**” and setting
will not be possible.
and the alarm recording area is “ON”, the remaining-
space warning level will be displayed as “**” and setting
will not be possible.
4
Click [SAVE].
The new setting is saved.
5. RECORDING CONDITIONS SET
Setting overwriting permission for the normal
recording area
recording area
Setting
Description
ON
When the normal recording area has been filled with
data, overwriting from the beginning of this area will
start automatically.
data, overwriting from the beginning of this area will
start automatically.
OFF
Recording is stopped when the normal recording area
has been filled with data.
has been filled with data.
Setting overwriting permission for the alarm
recording area
recording area
Setting
Description
ON
When the alarm recording area has been filled with
data, overwriting from the beginning of this area will
start automatically.
data, overwriting from the beginning of this area will
start automatically.
OFF
Recording is stopped when the alarm recording area
has been filled with data.
has been filled with data.
1
2
3
4
Setting the remaining-space warning level
e00_l8had_us_7.book Page 102 Wednesday, March 10, 2004 2:47 PM