Sanyo DSR - 300 Manual Do Utilizador
English
23
3
NORMAL RECORDING/TIMER RECORDING
Follow the procedures below to record the monitored
image in the normal recording area.
image in the normal recording area.
1
Press the [REC/STOP] button.
The REC/STOP indicator lights. “ ” appears on the
screen (i.e., the recording symbol), and recording starts.
screen (i.e., the recording symbol), and recording starts.
z
When you record for the first time, the default settings
are used. For details regarding changing of the image
quality or recording rate, see P. 59.
are used. For details regarding changing of the image
quality or recording rate, see P. 59.
z
When the space remaining in the normal recording area
drops below the setting value, the FULL indicator lights
and recording stops. You can start recording from the
beginning again by changing the recording setting.
(JP. 57)
drops below the setting value, the FULL indicator lights
and recording stops. You can start recording from the
beginning again by changing the recording setting.
(JP. 57)
z
You can record and play back images at the same time.
See P. 26 for the procedure.
See P. 26 for the procedure.
z
You cannot change the menu during recording.
2
Press the [REC/STOP] button for at
least 2 seconds.
least 2 seconds.
The REC/STOP indicator goes out and recording stops.
Follow the procedures below to record the monitored
image in the normal recording area at the set time.
image in the normal recording area at the set time.
1
Press the
[TIMER] button.
[TIMER] button.
The TIMER indicator lights
and the digital video
recorder enters timer
recording standby mode.
and the digital video
recorder enters timer
recording standby mode.
z
A warning tone sounds if timer recording has not been
set.
set.
(1) See P. 60 for how to set timer recording.
(2) When the time specified in the timer settings arrives,
(2) When the time specified in the timer settings arrives,
the REC/STOP indicator lights, “ ” (the recording
symbol) appears in the screen, and recording starts.
symbol) appears in the screen, and recording starts.
(3) When the timer’s end time arrives, the REC/STOP
indicator goes out, and recording stops.
z
When the space remaining in the normal recording area
drops below the setting value, the FULL indicator lights
and recording stops. You can start recording from the
beginning again by changing the recording setting.
(JP. 57)
drops below the setting value, the FULL indicator lights
and recording stops. You can start recording from the
beginning again by changing the recording setting.
(JP. 57)
z
You can record and play back images at the same time.
See P. 26 for the procedure.
See P. 26 for the procedure.
2
Press the [TIMER] button.
The TIMER indicator turns off and recording stops.
[REC/STOP] button
[TIMER] button
FULL indicator
TIMER indicator
Normal recording
Ending normal recording
Recording
symbol
z
05- 10- 04
10: 50: 00 EN
10: 50: 00 EN
10FPS
Timer recording
Stopping during timer recording
05- 10- 04
10: 50: 00 EN
10: 50: 00 EN
10FPS
e00_l8had_us_7.book Page 23 Wednesday, March 10, 2004 2:47 PM