Sanyo DSR - 300 Manual Do Utilizador

English

Follow the procedures below to have the digital video 
recorder record an image from before detection of an 
alarm and the start of alarm recording.

Follow the procedures on P. 64 to set “8. ALARM REC 
MODE SET” on the <MAIN MENU 1> screen to “PRE-
ALARM RECORDING”.

The display returns to the normal screen.
“PRE” is displayed in the operation display area and the 
ALARM indicator lights. Pre-alarm recording starts (without 
displaying a symbol). 

Until an alarm signal is received, video will be recorded in 
a repetitive fashion in a section of the alarm recording area 
as set for pre-alarm recording by "DURATION". 

Pre-alarm recording is automatically ended and alarm 
recording starts.
z

“PRE” from the operation display area is replaced by 
“ALARM” and the ALARM indicator flashes.

z

When you record for the first time, the default settings 
are used. For details regarding changing of the image 
quality or recording rate, see P. 64.

z

When the space remaining in the alarm recording area 
drops below the setting value, the ALARM FULL 
indicator lights and recording stops. You can start 
recording from the beginning again by changing the 
recording setting. (JP. 57)

05- 10- 04 PRE

0001

20: 10: 00 EN

10FPS

05- 10- 04 ALARM 0001

20: 10: 00 EN

10FPS

ALARM FULL indicator

e00_l8had_us_7.book  Page 25  Wednesday, March 10, 2004  2:47 PM