Toshiba CIX-AG-NP-VA Manual Do Utilizador
Server-based Net Phone COS
Editing .INI Files
52
Strata CIX Net Phone AG 04/08
Editing the Agnt_Ph.INI File (Net Phone Main)
This configuration file contains many topics, some are controlled using the
Preferences Menu settings, some are dynamic and written by Net Phone during its use
and others are static and can only be changed by manually editing this file. This
section describes those items that need to be manually edited. DO NOT change other
items unless instructed by TOSHIBA Technical Support.
Preferences Menu settings, some are dynamic and written by Net Phone during its use
and others are static and can only be changed by manually editing this file. This
section describes those items that need to be manually edited. DO NOT change other
items unless instructed by TOSHIBA Technical Support.
Setting the Format of Phone Numbers
Applications some times need a specific format for recognizing phone numbers.
Changing the “HypenFormat1” (%H) and “HyphenFormat2” (%J) parameters will
define how the dialed number or CallerID/ANI number will be treated when each of
these Call Variables. The phone number received (%P) using ANI or Caller ID is
typically 10 digits without any formatting.
Changing the “HypenFormat1” (%H) and “HyphenFormat2” (%J) parameters will
define how the dialed number or CallerID/ANI number will be treated when each of
these Call Variables. The phone number received (%P) using ANI or Caller ID is
typically 10 digits without any formatting.
[General]
HypenFormat1=xxx-xxx-xxxx
HypenFormat2=(xxx)xxx-xxxx
Speed Dial Name
When you dial using a Speed Dial key the label of the key will automatically are
attached as the 'name' on that call. To disable this feature set this flag to =N for No.
attached as the 'name' on that call. To disable this feature set this flag to =N for No.
[General]
SD_UseName=Y
Calls to Act Upon
When you use a Programmable Key with a "User-Defined Action" or a System/PBX
Command that action may attempt to affect a call (i.e. Transfer, Divert, etc.). If more
than one call is present on the phone, which call should be affected? This CallsToAct
value determines which calls and in which order: "T"=Talking, "H"=Holding,
"R"=Ringing, and "C"=Clearing. If for example, you wanted to act on Ringing then
holding calls you would set the value to "RH". To disable actions for affecting calls,
set the value to =N for None.
Command that action may attempt to affect a call (i.e. Transfer, Divert, etc.). If more
than one call is present on the phone, which call should be affected? This CallsToAct
value determines which calls and in which order: "T"=Talking, "H"=Holding,
"R"=Ringing, and "C"=Clearing. If for example, you wanted to act on Ringing then
holding calls you would set the value to "RH". To disable actions for affecting calls,
set the value to =N for None.
[General]
CallsToAct=THR