Siemens 30ISDN Manual Do Utilizador

kap01.fm5

27.11.98

Profiset 30isdn engl.: A30853-X300-B107-1-7619

You can set the volume of the handset and loudspeaker to 

four levels (1...4: 1=minimum volume, 4=maximum vol-

ume). The volume is preset to level 2. You can set the vol-

ume via the digit keys or the +/-  keys.

In the course of a call, you can change the volume via the 

+/- key. The setting applys only to the current call.

The following settings are possible:

●

0 = Main station: If you were assigned MSNs by your 

network operator, this is the correct call processing 

type. Several devices with the same or different MSN 

can be connected to a main station, whereby calls be-

tween these devices are liable for charges. “Main sta-

tion“ is also the correct call processing type for oper-

ating at the majority of extensions (PBX).

●

1 = Point to point: Point to point connection = 

system operation. In the event of a telephone system 

failure, the telephone can be operated at a system 

connection. In this emergency operation scenario, the 

simple telephone functions can be activated. The 

telephone rings with every incoming call at the sys-

tem connection irrespective of possibly entered 

MSN.

The telephone is preset to “Main station“.

a

Handset is on-hook.

S23

Start the programming procedure.

1 ... 4

Press one of the keys  1 ... 4.

+ / -

Change the volume step by step via the +/-  key.

S

Save the setting.

a

Handset is on-hook.

S06

Start the programming procedure.

T

Enter the password if necessary.

0 or 1

Press key 0 or 1 .

S

Save the setting.