Nortel Networks M7410 Manual Do Utilizador
Tracking your incoming calls 69
P0908510 Issue 02
Enterprise Edge Feature Programming Telephone Guide
Names and numbers for external callers are displayed only if you have subscribed
to Call Display services from your local telephone company.
to Call Display services from your local telephone company.
Viewing a Call Log item
Press
√
or
MORE
to view the information for a call log item.
Erasing log items
You should routinely erase log items that you’ve read, to make space for new items
in your log.
in your log.
1. Display the item you want to erase.
2. Press
˙
or
ERASE
.
3. Press
®
to exit.
If you accidentally erase an item, you can retrieve it.
1. Press
˙
or
UNDO
immediately after accidentally erasing an item.
2. Press
®
to exit.
Making a call using Call Log
You may find it helpful to place calls from within your Call Log. The number stored
for each call may vary depending on the type of call. For example, if the call was
placed from a Centrex or PBX system, the first few numbers may need to be
trimmed before you can make the call. If the number you want to call is long
distance, or if you want to use a line pool, you may need to add numbers.
for each call may vary depending on the type of call. For example, if the call was
placed from a Centrex or PBX system, the first few numbers may need to be
trimmed before you can make the call. If the number you want to call is long
distance, or if you want to use a line pool, you may need to add numbers.
To place a call:
1. Display the log item for the call you want to place.
2. Display the associated telephone number.
3. Press
√
or
TRIM,
once for every digit that you want to remove.
4. Dial any extra digits required.
5. Press an external line or line pool button.
6. Lift the receiver. (This is not necessary if Handsfree is programmed at your
telephone.) The displayed number is dialed.