Samsung 100 Manual Do Utilizador

16

This program is used to assign a character name or identification for each C.O. line.
You may assign a name of 11 characters long.

UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.

Open customer programming and follow the instructions below.

1. Press TRSF and then dial 404

Display shows

2. Dial trunk (e.g., 704) OR press UP or

DOWN to select trunk and press the right
soft key to move the cursor

3. Enter the trunk name using the procedure

in Program Station Names and press the 

right soft key to return to step 2 

4. Press TRSF to store and exit programming

OR press SPK to store and advance to 
the next program

sys_screen.qxp  5/11/2006  6:26 PM  Page 23

17

This program is used to assign a character name or identification for each station
group. You may assign a name 11 characters long.

UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.

Open customer programming and follow the instructions below.

1. Press TRSF and then dial 602

Display shows the first group

2. Dial the group number (e.g., 505) OR

press the UP or DOWN key to make a 
selection and press the left or right 
soft key to move the cursor

3. Enter the name using the method

in Program Station Names

4. Press the left or right soft key to return to 

step 2 OR press TRSF to store and exit
programming OR press SPK to store and 
advance to the next program

sys_screen.qxp  5/11/2006  6:26 PM  Page 24