Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Manual Do Utilizador
Part 1 – AT Commands for All Universal IP Devices
Chapter 1 – General AT Commands for All Universal IP Devices
Universal IP AT Commands Reference Guide (Document S000457K)
15
#ESCAPECHAR – Configure the Escape Character for DLEMODE
Description:
This parameter defines the escape character for the clients that use an escape character (also
known as DLE shielding with regards to Universal IP.
known as DLE shielding with regards to Universal IP.
Note:
This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP)
Syntax:
AT#ESCAPECHAR=<parameter1>
AT#ESCAPECHAR?
Values:
0-255; Integer value between 0 and 255
Responses:
\r\n#ESCAPECHAR: VALUE\r\n
\r\nOK\r\n
\r\nERROR\r\n
\r\nOK\r\n
\r\nERROR\r\n
Examples:
send: AT#ESCAPECHAR=3\r
reply: \r\nOK\r\n
send: AT#ESCAPECHAR?\r
reply: \r\n#ESCAPECHAR: 3\r\n
reply: \r\nOK\r\n
Display Commands
#VSHOWSERIAL
–
Display RS-232 Signal Status of the User Serial Port
Description:
Displays the RS-232 signal status; used for engineering.
Note:
This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP)
Syntax:
AT#VSHOWSERIAL
Values:
na
Responses:
\r\SERIAL information\r\n
\r\nOK\r\n
\r\nERROR\r\n
\r\nOK\r\n
\r\nERROR\r\n
Examples:
send: AT#VSHOWHARDWARE\r
reply: \r\n+-------------------------------+------------------------------------------+\r\n
reply: \r\n| Serial EIA Signal Status (DCE interface) |\r\n
reply: \r\n+-------------------------------+------------------------------------------+\r\n
reply: \r\n| CTS : ON |\r\n
reply: \r\n| DSR : OFF |\r\n
reply: \r\n| DCD : OFF |\r\n
reply: \r\n| RTS : ON |\r\n
reply: \r\n| DTR : ON |\r\n
reply: \r\n+-------------------------------+------------------------------------------+\r\n
reply: \r\nOK\r\n