Emerson 1058 Manual Do Utilizador

9

2. Secure the M12 cable assembly with the metal

threaded nut from the outside of the enclosure to
ensure a proper seal. 

3. Remove the 4-lead terminal block which is installed

on the Profibus slide-in board.  Wire the four leads
of the cable assembly to the 4-lead removable
terminal block.  The lead positions are labeled on
the Profibus board (Black, Green, Red, White) to
assist in wiring.  Follow the wiring sequence
indicated on the Profibus board (see photo).  A #0 
Philips head screwdriver is required to open and 
close the terminal posts on the provided terminal 
block.  

Note: that Profibus wiring is polarity-sensitive.  The
Green color lead must be wired to lead position A.
The Red color lead must be wired to lead position B.