Справочник Пользователя для ResMed Stellar 150

23

Troubleshooting

En

glis

h

Air path is blocked.

1. Check the air path for any blockages.
2. Remove the blockages.
3. If the alarm is not cleared, stop 

treatment. 

4. Re-start treatment. 

The temperature inside the device is too 
high. Treatment may lead to stop.

Ensure the ambient temperature is within 
the specified operating range. If the 
problem persists within the specified 
operating conditions please return the 
device for servicing.
Contact your clinician.

Therapy pressure exceeds pre-set alarm 
level.

1. Stop treatment. 
2. Re-start treatment. 
If the problem persists contact your 
clinician.

The air tubing is not connected properly.

1. Check the air circuit integrity and 

reconnect.

2. If the alarm doesn‘t get cleared, stop 

treatment.

3. Re-start treatment. 

The air circuit is not connected properly. 

1. Check the air circuit integrity and 

reconnect.

2. If the alarm is not cleared, stop 

treatment.

3. Re-start treatment. 

Minute ventilation level has dropped 
below the alarm setting level.

Contact your clinician.

The respiratory rate level has dropped 
below or has exceeded the alarm setting 
level.

Contact your clinician.

High mask leak for more than 20 
seconds.

• Adjust the mask to minimise leak (see 

“Using mask-fit” on page 14).

• Check the air circuit integrity and 

reconnect.

• If the problem persists contact your 

clinician.