Справочник Пользователя для Oregon Scientific SE122

9

If the heart rate readings become erratic or stop, your 
transmitter battery may need replacing.
To change the battery:

1.  Open the transmitter battery lid with a coin by turning it 

counterclockwise.

2.  Insert a new CR2032, 3V lithium battery.
3.  Replace the battery compartment door.

 Take care not to touch the two contacts otherwise 

the battery can discharge. If you are unsure about the 
procedure consult your dealer.

If the watch receives no transmitter signal after 5 minutes, 
the SE122 will switch back to the previous display mode.

Real time clock

12/24 hour with hour / minute 
/ second

Stopwatch

00:00:00 to 29:59:59 (hrs: 
min: sec)

Heart rate

30 - 240 bpm

Upper limit

80 - 240 bpm

Lower limit

30 - 220 bpm

Calorie range

0 - 9999 kcal

Power

Watch 1 x CR2032 3V battery
Chest belt 1 x CR2032 3V 
battery

Operating temp

-10°C to +50°C (14°F to 122°F)

Storage temp

-20°C to +60°C (-4°F to 140°F)

Water resistant

Up to 50 meters (164 feet) 
without pressing keys

•  Do not subject the unit to excessive force, shock, dust, 

temperature or humidity.

•  Do not cover the ventilation holes with any items such 

as newspapers, curtains etc.

•  Do not immerse the unit in water. If you spill liquid over 

it, dry it immediately with a soft, lint-free cloth.

•  Do  not  clean  the  unit  with  abrasive  or  corrosive 

materials.

•  Do not tamper with the unit’s internal components. This 

invalidates the warranty. 

•  Only  use  fresh  batteries.  Do  not  mix  new  and  old 

batteries. 

•  Images shown in this manual may differ from the actual 

display.